Formica sheet laminate, 909 Black, presents the deepest, darkest, richest black for those looking to exude sophistication in any room.
Formica laminate sheets provide a heat and scratch resistant surface ideal for kitchens, bathrooms, & beyond. The only limit to design is your creativity when it comes to the sumptuous solids and innovative patterns offered, mixed with textured finishes, allowing you to create an ultimate feast for the senses.
Please Note: Peel & Stick items are Special Orders and may not be canceled or returned once purchased.
At Cabinetmaker Warehouse, you'll find everything you need for your latest project, all in one convenient place. From the lowest prices on fabrication essentials, including Laminate Sheets, to a wide selection of matching Backsplashes and Trim Edges, we have it all. Don't forget to check out our collections of Installation Accessories, Color Caulk, and Adhesives to professionally complete your project. With our curated selection of offerings, shipped directly to your door, you'll be able to effortlessly bring your vision to life.
Specifications
|
Thickness |
|
|
AN: Infiniti |
0.37″ (0.9 mm) |
|
Vertical Grade |
0.027" (0.68mm) |
|
Vertical Grade (3M™ Peel & Stick) |
.027” + .001” – .004” (0.68mm + 0.02mm – 0.10mm) |
|
General Purpose |
0.035" (0.88 mm) |
|
General Purpose (3M™ Peel & Stick) |
.035” + .001” – .004” (0.88mm + 0.02mm – 0.10mm) |
Laminate is made in many different grades intended for specific uses. For practical purposes we’ve narrowed this down to two categories; Vertical and Standard Grade.
Vertical Grade is ideal for use on low wear surfaces such as cabinet faces and sides, doors, furniture, etc. It is a little thinner than standard grade and thus, a thinner line will be visible at the edges. Vertical Grade laminate is not recommended for countertops or any surface that will likely see a lot of use. Thickness’ can range from .027″ (0.7mm) nominal to .029″ (.7mm) nominal.
Standard Grade, or Horizontal Grade, is a little thicker and typically is used for higher wear areas like countertops and desktops. This material is less flexible and slightly more difficult to work with but is the standard for making most laminate countertops. Thickness’ can range from .035″ (0.9mm) nominal to .045″ (1.1mm) nominal.
You may also like
More from Formica
More from Formica Laminate Sheets
Recently viewed